Logging And Network Management Command Set
Configuring SMON
11-42 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.3.5 set smon vlan
Use this command to create, start, or stop SNMP VLAN-related statistics counting.
set smon vlan {create | enable | disable} port-string [owner]
Syntax Description
Command Defaults
If owner is not specified, none will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how set the device to gather SMON VLAN-related statistics from 1-Gigabit
Ethernet port 14 in module 3:
create | enable |
disable
Creates, enables, or disables SMON VLAN statistics
counting. Create automatically enables (starts) counters.
port-string Specifies one or more source ports on which to collect
statistics. For a detailed description of possible port-string
values, refer to Section 4.1.1.
owner (Optional) Specifies an administratively assigned name of
the owner of this entity.
Matrix(rw)->set smon vlan ge.3.14
To Next Page
Loading...
Need help?
General