Policy Classification Configuration Command Set
Configuring Policy Profiles
8-10 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.1.5 set policy invalid action
Use this command to assign the action the device will apply to an invalid or unknown policy.
set policy invalid action {default-policy | drop | forward}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to assign a drop action to invalid policies:
default-policy Instructs the device to ignore this result and search for the
next policy assignment rule.
drop Instructs the device to block traffic.
forward Instructs the device to forward traffic as if no policy has
been assigned.
Matrix(rw)->set policy invalid action drop
To Next Page
Loading...
Need help?
General