Enterasys Matrix 2G4072-52 - Clear Sntp Poll-Interval

Logging And Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-131
11.2.6.9 clear sntp poll-interval
Use this command to clear the poll interval between unicast SNTP requests.
clear sntp poll-interval
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the SNTP poll interval
:
Matrix(rw)->clear sntp poll-interval