Enterasys Matrix 2G4072-52 - Set Netflow Port

Logging And Network Management Command Set
Configuring NetFlow
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-163
11.2.8.8 set netflow port
Use this command to enable NetFlow collection on a port.
set netflow port port-string {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Example
This example shows how to enable NetFlow collection on port ge.1.1
:
port-string Specify the port or ports on which to enable or disable
NetFlow collection.
enable | disable Enable or disable NetFlow collection.
Matrix(rw)->set netflow port ge.1.1 enable