Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-129
6.2.3.8 clear spantree lpcapablepartner
Use this command to reset the Loop Protect capability of port link partners to the default state of
false.
clear spantree lpcapablepartner port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the Loop Protect partner capability for ge.1.1:
port-string Specifies port(s) for which to clear their link partners’ Loop
Protect capability (reset to false). For a detailed description
of possible port-string values, refer to Section 4.1.1.
Matrix(rw)->clear spantree lpcapablepartner ge.1.1
To Next Page
Loading...
