Logging And Network Management Command Set
Configuring RMON
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-69
11.2.4.15 show rmon host
Use this command to display RMON properties and statistics associated with each host discovered
on the network.
show rmon host [port-string] [address | creation]
Syntax Description
Command Defaults
• If port-string is not specified, information about all ports will be displayed.
• If address or creation are not specified, entries will not be sorted.
Command Type
Switch command.
Command Mode
Read-Only.
port-string (Optional) Displays RMON properties and statistics for
specific port(s).
address | creation (Optional) Sorts the display by MAC address or creation
time of the entry.
To Next Page
Loading...
