Port Configuration Command Set
Setting Console Port Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-15
4.3.1.9 show console bits
Use this command to display the number of bits per character set for one or more console ports.
show console bits [port-string]
Syntax Description
Command Defaults
If port-string is not specified, the bits per character setting for all console ports will
be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the bits per character setting for console port com.1.1:
port-string (Optional) Displays the bits per character setting for specific
console port(s).
Matrix(rw)->show console bits com.1.1
Port Bits
------------ --------
com.1.1 8
To Next Page
Loading...
