Enterasys Matrix 2G4072-52 - Clear Singleportlag

Configuring LACP
Configuring Link Aggregation
4-112 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.5.4.11 clear singleportlag
Use this command to reset the single port LAG function back to the default state of disabled.
clear lacp singleportlag
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the single port LAG function back to disabled:
Matrix(rw)->clear lacp singleportlag