Port Configuration Command Set
Configuring Link Traps and Link Flap Detection
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-81
4.3.8.11 clear linkflap down
Use this command to toggle link flap disabled ports to operational.
clear linkflap down [port-string]
Syntax Description
Command Defaults
If port-string is not specified, all ports disabled by a link flap violation will be made
operational.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to make disabled port fe.1.4 operational:
port-string Specifies the port(s) to make operational. For a detailed
description of possible port-string values, refer to
Section 4.1.1.
Matrix(rw)->clear linkflap down fe.1.4
To Next Page
Loading...
