Logging And Network Management Command Set
Configuring RMON
11-56 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.4.6 clear rmon history
Use this command to delete one or more RMON history entries or reset one or more entries to
default values. For specific values, refer to Section 11.2.4.5.
clear rmon history {index-list | to-defaults}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete RMON history entry 1:
index-list Specifies one or more history entries to be deleted,
causing them to disappear from any future RMON
queries.
to-defaults Resets all history entries to default values. This will cause
entries to reappear in RMON queries.
Matrix(rw)->clear rmon history 1
To Next Page
Loading...
