VLAN Configuration Command Set
Creating and Naming Static VLANs
7-8 Matrix DFE-Platinum and Diamond Series Configuration Guide
7.3.2.2 set vlan name
Use this command to set or change the ASCII name for a new or existing VLAN.
set vlan name vlan-list vlan-name
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the name for VLAN 7 to green:
vlan-list Specifies the VLAN ID of the VLAN(s) to be named.
vlan-name Specifies the string used as the name of the VLAN (1 to 32
characters).
Matrix(rw)->set vlan name 7 green
To Next Page
Loading...
