Enterasys Matrix 2G4072-52 - Clear Cos Port-Config Txq

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
8-72 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.3.9 clear cos port-config txq
Use this command to clear one or all non-default Class of Service transmit queue port group
configurations:
clear cos port-config txq all | group-type-index {entry | name | ports arb-slice |
arb-percentage}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all non-default CoS transmit queue port group entries:
all |
group-type-index
Clears all transmit queue port config entries or a specific
entry.
entry Clears all non-default transmit queue entries.
name Clears the name associated with this transmit queue
entry.
ports Clears the port(s) assigned to this port group.
arb-slice |
arb-percentage
Clears the number or percentage of slices setting.
Matrix(rw)->clear cos port-config txq all