Enterasys Matrix 2G4072-52 - Clear Rmon Filter

Logging And Network Management Command Set
Configuring RMON
11-92 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.4.32 clear rmon filter
Use this command to clear an RMON filter entry.
clear rmon filter {index index | channel channel}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear RMON filter entry 1:
index index |
channel channel
Clears a specific filter entry, or all entries belonging to a
specific channel.
Matrix(rw)->clear rmon filter index 1