Enterasys Matrix 2G4072-52 - Show Logging Local

Logging And Network Management Command Set
Configuring System Logging
11-20 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.1.11 show logging local
Use this command to display the state of message logging to the console and a persistent file.
show logging local
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the state of message logging. In this case, logging to the console
is enabled and logging to a persistent file is disabled.
Matrix(rw)->show logging local
Syslog Console Logging enabled
Syslog File Logging disabled