Logging And Network Management Command Set
Configuring NetFlow
11-164 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.8.9 clear netflow port
Use this command to return a port to the default NetFlow collection state of disabled.
clear netflow port port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Example
This example shows how to disable NetFlow collection on port ge.1.1
:
port-string Specify the port or ports on which to disable NetFlow
collection.
Matrix(rw)->clear netflow port ge.1.1
To Next Page
Loading...
