Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
6-128 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.3.7 show spantree lpcapablepartner
Use this command to the Loop Protect capability of a link partner for one or more ports.
show spantree lpcapablepartner [port port-string]
Syntax Description
Command Defaults
If no port-string is specified, Loop Protect capability for link partners is displayed
for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the Loop Protect partner capability for ge.1.1:
port-string (Optional) Specifies port(s) for which to display Loop
Protect capability for its link partner. For a detailed
description of possible port-string values, refer to
Section 4.1.1.
Matrix(rw)->show spantree lpcapablepartner port ge.1.1
Link partner of port ge.1.1 is not LoopProtect-capable.
To Next Page
Loading...
