Enterasys Matrix 2G4072-52 - Show Lacp Singleportlag

Configuring LACP
Configuring Link Aggregation
4-110 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.5.4.9 show lacp singleportlag
Use this command to display the status of the single port LAG function.
show lacp singleportlag
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of the single port LAG function
:
Matrix(rw)->show lacp singleportlag
Single Port LAGs: enabled