Port Configuration Command Set
Configuring Broadcast Suppression
4-84 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.9.1 show port broadcast
Use this command to display port broadcast suppression information for one or more ports.
show port broadcast [port-string]
Syntax Description
Command Defaults
If port-string is not specified, broadcast status of all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display broadcast information for Fast Ethernet port 2 in module 2:
Table 4-7 provides an explanation of the command output.
port-string (Optional) Displays broadcast status for specific port(s).
For a detailed description of possible port-string values,
refer to Section 4.1.1.
Matrix(rw)->show port broadcast fe.2.2
Port Total BC Threshold Peak Rate Peak Rate Time
Packets (pkts/s) (pkts/s) (ddd:hh:mm:ss)
-----------------------------------------------------------------------
fe.2.2 165 148810 8 000:05:57:37
Table 4-7 show port broadcast Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible
port-string values, refer to Section 4.1.1.
Total BC Packets Total broadcast packets received on this port.
Threshold (pkts/s) Current broadcast threshold in packets per second on this
port.
To Next Page
Loading...
Need help?
General