Enterasys Matrix 2G4072-52 - Clear Multiauth Port

Security Configuration Command Set
Configuring Multiple Authentication
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-141
14.3.10.7 clear multiauth port
Use this command to clear multiple authentication properties for one or more ports.
clear multiauth port {[mode] [numusers] port-string}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to clear the port multiple authentication
mode on all 1-Gigabit Ethernet
ports:
mode Clears the port(s)’ multiple authentication mode.
numusers Clears the value set for the number of users allowed
authentication on port(s).
port-string Specifies the port(s) on which to clear multiple
authentication properties.
Matrix(rw)->clear multiauth port mode ge.*.*