Enterasys Matrix 2G4072-52 User Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-61
6.2.1.48 show spantree txholdcount
Use this command to display the maximum BPDU transmission rate.
show spantree txholdcount
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the transmit hold count setting:
Matrix(rw)->show spantree txholdcount
Tx hold count = 3.

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English