Security Configuration Command Set
Configuring TACACS+
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-31
14.3.4.6 show tacacs session
Use this command to display the current TACACS+ client session settings.
show tacacs session {authorization | accounting [state]}
Syntax Description
Command Defaults
If state is not specified, all session accounting configuration parameters are
displayed (which at this time includes only the enabled/disabled status).
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display client session authorization information:
This example shows how to display client session accounting state.
authorization Display client session authorization settings.
accounting Display client session accounting settings.
state (Optional) Display the client session accounting state.
Matrix(ro)->show tacacs session authorization
TACACS+ service: exec
TACACS+ session authorization A-V pairs:
access level attribute value
read-only 'priv-lvl' '0'
read-write 'priv-lvl' '1'
super-user 'priv-lvl' '15'
Matrix(ro)->show tacacs session accounting state
TACACS+ session accounting state: enabled
To Next Page
Loading...
