Port Configuration Command Set
Configuring Link Traps and Link Flap Detection
4-82 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.8.12 clear linkflap
Use this command to clear all link flap options and / or statistics on one or more ports.
clear linkflap {all | stats [port-string] | parameter port-string {threshold |
interval | downtime | all}
Syntax Description
Command Defaults
If port-string is not specified, settings and/or statistics will be cleared on all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to clear all link flap options on port fe.1.4:
all | stats Clears all options and statistics, or clears only statistics.
parameter Clears link flap parameters.
threshold |
interval |
downtime | all
Clears link flap threshold, interval, downtime or all
parameters.
port-string (Optional unless parameter is specified) Specifies the
port(s) on which to clear settings. For a detailed description
of possible port-string values, refer to Section 4.1.1.
Matrix(rw)->clear linkflap all fe.1.4
To Next Page
Loading...
