Enterasys Matrix 2G4072-52 User Manual

Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
11-102 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.5.4 show rad
Use this command to display the status of the RAD (Runtime Address Discovery) protocol on the
switch.
show rad
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display RAD status:
Matrix(rw)->show rad
RAD is currently enabled.

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English