General Configuration Command Set
Setting User Accounts and Passwords
2-32 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.1.6 set system password aging
Use this command to set the number of days user passwords will remain valid before aging out, or
to disable user account password aging.
set system password aging {days | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to set the system password age time to 45 days:
days Specifies the number of days user passwords will remain
valid before aging out. Valid values are 1 to 365.
disable Disables password aging.
Matrix(su)->set system password aging 45
To Next Page
Loading...
