Enterasys Matrix 2G4072-52 User Manual

General Configuration Command Set
Configuring Power over Ethernet (PoE)
2-100 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.5.3 clear inlinepower mode
Use this command to reset chassis power allocation to the default mode of auto.
clear inlinepower mode
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the chassis power allocation mode to auto:
Matrix(rw)->clear inlinepower mode

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English