Security Configuration Command Set
Configuring MAC Authentication
14-90 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.7.9 set macauthentication authallocated
Use this command to set the number of MAC authentication sessions allowed for one or more ports.
set macauthentication authallocated number port-string
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the number of allowed MAC authentication sessions to 4 on ge.2.1:
number Specifies the number of authentication sessions allowed.
port-string Specifies port(s) on which to set the number of
authentication sessions. For a detailed description of
possible port-string values, refer to Section 4.1.1.
Matrix(rw)->set macauthentication authallocated 4 ge.2.1
To Next Page
Loading...
