Enterasys Matrix 2G4072-52 - Clear Cos All-Entries

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
8-92 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.3.25 clear cos all-entries
Use this command to clears all Class of Service entries except priority settings 0 - 7.
clear cos all-entries
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all Class of Service entries except priority settings 0 - 7:
Matrix(rw)->clear cos all-entries