Security Configuration Command Set
Configuring TACACS+
14-38 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.4.12 set tacacs singleconnect
Use this command to enable or disable the ability of the TACACS+ client to send multiple requests
over a single TCP connection. When enabled, the TACACS+ client will use a single TCP
connection for all requests to a given TACACS+ server.
set tacacs singleconnect {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to disable sending multiple requests over a single connection.
enable | disable Enable or disable the ability to send multiple requests over
a single TCP connection.
Matrix(rw)->set tacacs singleconnect disable
To Next Page
Loading...
