Logging And Network Management Command Set
Configuring System Logging
11-12 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.1.7 clear logging default
Use this command to reset logging default values.
clear logging default{[facility] [severity] [port]}
Syntax Description
Command Defaults
• At least one optional parameter must be entered.
• All three optional keywords must be entered to reset all logging values to
defaults.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the Syslog default severity level to 6:
facility (Optional) Resets the default facility name to local4.
severity (Optional) Resets the default logging severity level to 6
(notifications of significant conditions).
port (Optional) Resets the default UDP port the client uses to
send to the server to 514.
Matrix(rw)->clear logging default severity