Enterasys Matrix 2G4072-52 - Show Macauthentication

Security Configuration Command Set
Configuring MAC Authentication
14-80 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.7.1 show macauthentication
Use this command to display MAC authentication information for one or more ports.
show macauthentication [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, MAC authentication information will be displayed
for all ports.
Examples
This example shows how to display MAC authentication information for ge.1.1 through 8:
Table 14-4 provides an explanation of the command output.
port-string (Optional) Displays MAC authentication information for
specific port(s). For a detailed description of possible
port-string values, refer to Section 4.1.1.
Router3(su)->show macauthentication ge.1.1-8
MAC authentication: - disabled
MAC user password: - NOPASSWORD
Port username significant bits - 48
Port Port Quiet Reauth Auth Auth Reauthentications
State Period Period Allowed Allocated
-------- -------- ---------- ---------- -------- --------- ---------------
ge.1.1 disabled 0 3600 256 256 disabled
ge.1.2 disabled 0 3600 256 256 disabled
ge.1.3 disabled 0 3600 256 256 disabled
ge.1.4 disabled 0 3600 256 256 disabled
ge.1.5 disabled 0 3600 256 256 disabled
ge.1.6 disabled 0 3600 256 256 disabled
ge.1.7 disabled 0 3600 256 256 disabled
ge.1.8 disabled 0 3600 256 256 disabled