VLAN Configuration Command Set
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
7-28 Matrix DFE-Platinum and Diamond Series Configuration Guide
7.3.3.14 clear port discard
Use this command to reset the frame discard mode to the factory default setting (none).
clear port discard port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset Fast Ethernet port 7 in module module2 to the default discard
mode of “none”:
port-string Specifies the port(s) for which to reset frame discard mode.
For a detailed description of possible port-string values,
refer to Section 4.1.1.
Matrix(rw)->clear port discard fe.2.7
To Next Page
Loading...
