Logging And Network Management Command Set
Configuring System Logging
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-21
11.2.1.12 set logging local
Use this command to configure log messages to the console and a persistent file.
set logging local console {enable | disable} file {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This command shows how to enable logging to the console and disable logging to a persistent file:
console enable |
disable
Enables or disables logging to the console.
file enable | disable Enables or disables logging to a persistent file.
Matrix(rw)->set logging local console enable file
disable
To Next Page
Loading...
Need help?
General