Port Configuration Command Set
Setting Console Port Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-17
4.3.1.11 clear console bits
Use this command to clear the number of bits per character for one or more console ports.
clear console bits [port-string]
Syntax Description
Command Defaults
If port-string is not specified, bits per character will be cleared for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear bits per character for console port com.1.1:
port-string (Optional) Clears bits per character for specific console port(s).
Matrix(rw)->clear console bits com.1.1
To Next Page
Loading...
