Policy Classification Configuration Command Set
Configuring Policy Profiles
8-12 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.1.7 show port tci overwrite
Use this command to display the status of the port TCI overwrite function on one or more ports.
When enabled, this will allow policy rules to overwrite all tagged (TCI) frames ingressing on those
ports.
show port tcioverwrite [port-string]
Syntax Description
Command Defaults
If port-string is not specified, TCI overwrite status will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display TCI overwrite status for port fe.1.3:
port-string (Optional) Displays TCI overwrite status for specific
port(s).
Matrix(rw)->show port tcioverwrite fe.1.3
TCI overwrite for port fe.1.3 is disabled
To Next Page
Loading...
