Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-9
6.2.1.1 show spantree stats
Use this command to display Spanning Tree information for one or more ports.
show spantree stats [port port-string] [sid sid] [active]
Syntax Description
Command Defaults
• If port-string is not specified, Spanning Tree information for all ports will be
displayed.
• If sid is not specified, information for Spanning Tree 0 will be displayed.
• If active is not specified information for all ports will be displayed regardless
of whether or not they have received BPDUs.
Command Type
Switch command.
Command Mode
Read-Only.
port port-string (Optional) Displays information for the specified port(s).
For a detailed description of possible port--string values,
refer to Section 4.1.1.
sid sid (Optional) Displays information for a specific Spanning
Tree identifier. If not specified, SID 0 is assumed.
active (Optional) Displays information for ports that have
received STP BPDUs since boot.
To Next Page
Loading...
