Enterasys Matrix 2G4072-52 - Clear Policy Rule

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-39
8.3.2.5 clear policy rule
Use this command to delete one or all policy classification rule entries.
clear policy rule admin-profile | profile-index all-pid-entries | ether | icmptype
ipdestsocket | ipfrag | ipproto | ipsourcesocket | iptos | ipxclass | ipxdest |
ipxsource | ipxdestsocket | ipxsourcesocket | ipxtype | llcDsapSsap | macdest |
macsource | port | tci | tcpdestportip | tcpsourceportip | udpdestportip |
udpsourceportip | vlantag] [all-traffic-entries | data][mask mask] [port-string
port-string]}
Syntax Description
admin-profile |
profile-index
Deletes an administrative profile rule, or deletes rule(s)
associated with a specific profile number. Valid
profile-index values are 1 - 1023.
all-pid-entries Deletes all rules associated with the specified policy
profile index ID.
ether Deletes associated Ethernet II classification rule.
icmptype Deletes associated ICMP classification rule.
ipdestsocket Deletes associated IP destination classification rule.
ipfrag Deletes associated IP fragmentation classification rule.
ipproto Deletes associated IP protocol classification rule.
ipsourcesocket Deletes associated IP source classification rule.
iptos Deletes associated IP Type of Service classification rule.
ipxclass Deletes associated IPX transmission control classification
rule.
ipxdest Deletes associated IPX destination address classification
rule.
ipxsource Deletes associated IPX source address classification rule.
ipxdestsocket Deletes associated IPX destination socket classification
rule.
ipxsourcesocket Deletes associated IPX source socket classification rule.
ipxtype Deletes associated IPX packet type classification rule.
llcDsapSsap Deletes associated DSAP/SSAP classification rule.