Enterasys Matrix 2G4072-52 - Page 684

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-40 Matrix DFE-Platinum and Diamond Series Configuration Guide
Command Defaults
When applicable, data, mask, and port-string must be specified for individual rules
to be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
macdest Deletes associated MAC destination address classification
rule.
macsource Deletes associated MAC source address classification
rule.
port Deletes associated port-string classification rule.
tci Deletes associated Tag Control Information classification
rule.
tcpdestportip Deletes associated TCP destination port classification rule
with optional post-fix IP address.
tcpsourceportip Deletes associated TCP source port classification rule
with optional post-fix IP address.
udpdestportip Deletes associated UDP destination port classification
rule with optional post-fix IP address.
udpsourceportip Deletes associated UDP source port classification rule
with optional post-fix IP address.
vlantag Deletes associated VLAN tag classification rule.
all-traffic-entries |
data
(Optional) Deletes all entries associated with this traffic
rule or a specific data value entry. Refer to Table 8-3 for
valid values for each classification type.
mask mask (Optional) Deletes associated data mask. Refer to
Table 8-3 for valid values for each classification type and
data value.
port-string
port-string
(Optional) Deletes specified rule entries for specific
ingress port(s).