Enterasys Matrix 2G4072-52 User Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
6-132 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.3.11 clear spantree lpthreshold
Use this command to return the Loop Protect event threshold to its default value of 3.
clear spantree lpthreshold
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the Loop Protect event threshold to the default of 3:
Matrix(rw)->clear spantree lpthreshold

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English