Enterasys Matrix 2G4072-52 - Clear Cos Settings

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-89
8.3.3.22 clear cos settings
Use this command to clear Class of Service entry settings.
clear cos settings cos-list {[all] | [priority] [tos-value] [txq-reference]
[irl-reference]}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the priority and transmit queue reference values for CoS entry 2:
cos-list Specifies a Class of Service entry to clear.
all Clears all settings associated with this entry.
priority Clears the priority value associated with this entry.
tos-value Clears the Type of Service value associated with this
entry.
txq-reference Clears the transmit queue reference associated with this
entry.
irl-reference Clears the inbound rate limiting reference associated with
this entry.
Matrix(rw)->clear cos settings 2 priority txq-reference