SNMP Configuration Command Set
Configuring SNMP MIB Views
Matrix DFE-Platinum and Diamond Series Configuration Guide 5-33
5.3.4 Configuring SNMP MIB Views
Purpose
To review and configure SNMP MIB views. SNMP views map SNMP objects to access rights.
Commands
The commands used to review and configure SNMP MIB views are listed below and described in
the associated section as shown.
• show snmp view (Section 5.3.4.1)
• show snmp context (Section 5.3.4.2)
• set snmp view (Section 5.3.4.3)
• clear snmp view (Section 5.3.4.4)
To Next Page
Loading...
