Enterasys Matrix 2G4072-52 User Manual

General Configuration Command Set
Starting and Configuring Telnet
2-128 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.8.6 clear router telnet
Use this command to reset Telnet service to the router to the default state of disabled.
clear router telnet
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset Telnet service to the router to disabled:
Matrix(rw)->clear router telnet

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English