Enterasys Matrix 2G4072-52 - Clear Physical Assetid

General Configuration Command Set
Setting Basic Device Properties
2-90 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.3.38 clear physical assetid
Use this command to reset the asset ID for a module to a zero-length string.
clear physical assetid module module
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the asset ID for module 1:
module module Specifies the module for which to clear the asset ID.
Matrix(rw)->clear physical assetid module 1