Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
8-62 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.3.3 show cos port-type
Use this command to display Class of Service port type configurations. The Matrix Series CoS
implementation provides two default port type groupings for designating available rate limiting and
transmit queue resources on device modules. Port type 0, which is available only on Matrix
DFE-Platinum Series chassis-based modules, designates the DFE Platinum 7G4270-12 module.
Port type 1 designates all other modules, including Gold DFE and NSA modules. Other port
groupings can be configured using the commands in this section.
show cos port-type [irl | txq] [index-list]
Syntax Description
Command Defaults
If not specified, all rate limiting information for all port types will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
irl | txq (Optional) Displays inbound rate limiting or transmit
queue information.
index-list (Optional) Displays information for a specific port type.
To Next Page
Loading...
Need help?
General