Enterasys Matrix 2G4072-52 - Page 380

Configuring LACP
Configuring Link Aggregation
4-120 Matrix DFE-Platinum and Diamond Series Configuration Guide
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all link aggregation parameters for port ge.3.16:
padminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync |
lacpcollect |
lacpdist | lacpdef |
lacpexpire | all
Clears the port’s specific partner admin state, or all
partner admin state(s).
Matrix(rw)->clear port lacp port ge.3.16