Logging And Network Management Command Set
Configuring RMON
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-81
Table 11-10 provides an explanation of the command output. Properties are set
using the set rmon matrix properties command as described in Section 11.2.4.24.
Table 11-10 show rmon matrix Output Details
Output What It Displays...
Matrix Index Index number for this RMON matrix entry.
Interface Interface for which host monitoring is being conducted.
Table size Number of entries in the matrix table for this interface.
Last deletion System up time when the last entry was deleted from the
matrix table associated with this entry.
Status Whether this matrix entry is enabled (valid) or disabled.
Owner Text string identifying who configured this entry.
Source Source of the data from which this entry creates a traffic
matrix.
Destination Destination of the data from which this entry creates a traffic
matrix.
Packets Number of packets (including bad packets) transmitted from
the source address to the destination address.
Octets Number of octets (excluding framing bits, but including FCS
octets) contained in all packets transmitted from the source
address to the destination address.
Errors Errors recorded.
To Next Page
Loading...
Need help?
General