General Configuration Command Set
Managing the Management Authentication Notification MIB
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-37
2.2.2.1 show mgmt-auth-notify
Use this command to display the current setting for the Management Authentication Notification
MIB.
show mgmt-auth-notify
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current information for the Management Authentication
Notification.:
Matrix(su)->show mgmt-auth-notify
Management Type Status
--------------- --------
console enabled
ssh enabled
telnet enabled
web enabled
To Next Page
Loading...
