Enterasys Matrix 2G4072-52 - Page 458

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-6 Matrix DFE-Platinum and Diamond Series Configuration Guide
• set spantree mstcfgid (Section 6.2.1.19)
• clear spantree mstcfgid (Section 6.2.1.20)
• show spantree bridgeprioritymode (Section 6.2.1.21)
• set spantree bridgeprioritymode (Section 6.2.1.22)
• clear spantree bridgeprioritymode (Section 6.2.1.23)
• show spantree priority (Section 6.2.1.24)
• set spantree priority (Section 6.2.1.25)
• clear spantree priority (Section 6.2.1.26)
• show spantree bridgehellomode (Section 6.2.1.27)
• set spantree bridgehellomode (Section 6.2.1.28)
• clear spantree bridgehellomode (Section 6.2.1.29)
• show spantree hello (Section 6.2.1.31)
• set spantree hello (Section 6.2.1.31)
• clear spantree hello (Section 6.2.1.32)
• show spantree maxage (Section 6.2.1.33)
• set spantree maxage (Section 6.2.1.34)
• clear spantree maxage (Section 6.2.1.35)
• show spantree fwddelay (Section 6.2.1.36)
• set spantree fwddelay (Section 6.2.1.37)
• clear spantree fwddelay (Section 6.2.1.38)
• show spantree autoedge (Section 6.2.1.39)
• set spantree autoedge (Section 6.2.1.40)
• clear spantree autoedge (Section 6.2.1.41)
• show spantree legacypathcost (Section 6.2.1.42)
• set spantree legacypathcost (Section 6.2.1.43)
• clear spantree legacypathcost (Section 6.2.1.44)
• show spantree tctrapsuppress (Section 6.2.1.45)