IP Configuration Command Set
Configuring PIM
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-59
Nbr-Count Total number of PIM neighbors on the interface, discovered
by receiving PIM hello messages from other PIM routers on
the interface.
Query-Intvl Interval between Hello messages. Default is 30 seconds.
DR-Prior Designated router priority value on the interface. Set with
the ip pim dr-priority command (Section 12.2.7.3).
DR IP address of the designated router on the LAN.
Table 12-5 show ip pim interface Output Details (Continued)
Output What It Displays...
To Next Page
Loading...
Need help?
General