Enterasys Matrix 2G4072-52 - Page 1053

IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-93
12.2.8.14 serverfarm
Use this command to associate a virtual server with an LSNAT server farm.
serverfarm serverfarm-name
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command removes the virtual server association:
no serverfarm serverfarm-name
Command Type
Router command.
Command Mode
SLB Virtual Server Configuration mode: Matrix>Router1(config-slb-vserver)#
Command Defaults
None.
Example
This example shows how to associate the virtual server named “virtual-http” to the “httpserver”
server farm:
serverfarm-name Specifies a server farm name. Must be previously
configured with the ip slb serverfarm command as
described in Section 12.2.8.3.
Matrix>Router1(config)#ip slb serverfarm httpserver
Matrix>Router1(config-slb-sfarm)#real 10.1.2.1 port 80
Matrix>Router1(config-slb-real)#inservice
Matrix>Router1(config-slb-real)#exit
Matrix>Router1(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router1(config-slb-real)#inservice
Matrix>Router1(config-slb-real)#exit
Matrix>Router1(config-slb-sfarm)#exit
Matrix>Router1(config)#ip slb vserver virtual-http
Matrix>Router1(config-slb-vserver)#serverfarm httpserver