Discovery Protocols Command Set
Cisco Discovery Protocol
3-22 Matrix DFE-Platinum and Diamond Series Configuration Guide
Examples
This example shows how to set the Cisco DP port voice VLAN ID to 3 on port fe.1.6 and enable
the port operational state:
This example shows how to set the Cisco DP extended trust mode to untrusted on port fe.1.5 and
set the CoS priority to 1:
Matrix>set ciscodp port status enable vvid 3 fe.1.6
Matrix>set ciscodp port trust-ext untrusted cos-ext 1 fe.1.5
To Next Page
Loading...
